CHASSIS: Monoblock. Heavy duty type.

ENGINE: Ecological, Deutz make. Four stroke diesel, four cylinders, forced liquid cooling.
Maximum power DIN 70 HP to 2.500 r.p.m.

TRANSMISSION: Hydrostatic type. Axial pistons pump of variable displacement. Hydraulic motor at axial pistons of variable displacement. Both with automatic regulation through DA valve. Two speeds gear box in both driving directions.

STEERING: Hydraulic steering operating either on one axle or on both.

CABIN: Front closed cabin with windscreen whippers and regulable seat.

AXLES: Steering type front and rear axle, this last with oscilating assembly.
Loading capacity 6.000 kg each.
All wheel drive.

BRAKES:
- Service: Hydraulic internal shoe type acting on four wheels.
- Parking: Disc type on transmission with hand level control.

Reserved brake at stopped engine.

HIDRAULIC CIRCUITS: Three different circuits with only one tank:
- TRANSMISSION: Hydrostatic circuit cooling through oil-air intercooler.
- HOPPER ROTATION: Gear pump circuit.
- WHOLE WORKING: Gear pump circuit.

HOPPER EQUIPMENT: Total turn of 180º to be able to unload concrete at any point
around the machine.
Maximum capacity: ........................ 2 m3
Maximum unloading height: ............ 2.750 mm
Minimum unloading height:............. 1.000 mm

Hydraulic rotation of the conveyor in both senses for unloading, through hydraulic engine
driven by gear pump.

SPEED: Progressive from 0 to 20 km/h

STEERING RADIUS:
Internal: 1,50 m.
External: 7,50 m.

MAX. SLOPE: Fully loaded: 5 %.

ELECTRICAL EQUIPMENT: 12 V battery and all regular lighting devices and signals for
road traffic.

CAPACITIES
- Oil tank:...............125 l.
- Fuel tank:.............105 l.

TYRES: Industrial type 12,5 / 80 - 18.

WEIGHT: 5.800 kg.

NOTICE: If the maching is moving, the hopper must be in its minimal position.